Skip to content
Nerokit
My vehicle BMW 6 Series FR 0

BMW Buttons and Controls

BMW 6 Series F13 This page does not filter by your chassis: check compatibility on each product page. View parts F13

The dashboard of a BMW speaks to the driver as much as to passengers. Upgrading BMW buttons and controls or replacing a faulty switch means recovering the tactile precision that defines the Bavarian cockpit. More than 130 references cover ten iconic generations, from the E30 through the E61.

From 19,00 € to 69,00 € depending on the finish. Available finishes: carbon.

The chassis code is on your vehicle registration document. It alone determines compatibility: two vehicles of the same model may not take the same parts depending on their year and phase.

Bring Your Interior Back to Life Without Touching the Body

A window switch that responds sluggishly, a heated seat button whose dial spins freely, a climate control button whose backlighting has given out: a BMW cockpit ages through the details. Replacing the right part immediately restores the attention to quality that sets a Bavarian interior apart.

The influence of M Performance trim lines has established a clear standard in the BMW world: every control must be readable, precise to the touch, and within natural reach. Even on an E39 or an E46, a new part brings that spirit back. The interior regains a cohesion that years of use had gradually worn away.

Choosing Your BMW Buttons and Controls by Chassis Generation

BMW buttons and controls are not interchangeable across families without verification. Connectors, pin counts, switch footprint, and location (center console, door panel, dashboard) all vary between E3x, E4x, E5x, and E6x generations. The first step is to check your chassis code on your vehicle registration to filter compatible references accurately.

Variables you may encounter depending on the model: backlit or non-backlit, clip-in or tab-mounted switches, single or dual-function buttons. With more than 130 references catalogued across ten generations (E30 through E61), the lineup covers a very large portion of BMW cockpits produced during that period.

Can Controls from Different BMW Generations Be Swapped?

As a general rule, no. Pin layout and physical dimensions differ enough between the E3x, E4x, E5x, and E6x families to make cross-generation swaps unreliable. Each product listing specifies the supported generations, and sticking to that information is the best way to avoid a part that does not fit its housing.

30-day returns accepted if the part you receive does not meet your expectations.